how to dye carpet::Usually people prefer to buy new carpet to replace their faded carpet how to dye carpet

how to dye carpet::Usually people prefer to buy new carpet to replace their faded carpet.
However buying a new carpet is expensive and not convenient in current tough economic times.
Dyeing the faded carpet by yourself is a good solution to return the original look and may save you hundreds or thousands dollars.
Before you start, there are some cautions that must be followed carefully to make the job successful.
You have to identify the material of the carpet fiber and the dye absorbing capability.
Different materials of carpet fiber require different dyes.
Fabric material such as woolen or nylon can be dyed, while acrylic or polyester cannot be dyed.
If you are not sure the fiber of your carpet is made out of, ask an expert to take a look at your carpet.
The most important thing is you buy the right type of dye.
Once you know the material of the carpet fiber, decide on the color of dye for the carpet.
The finishing color of the carpet depends on the original color.
If the original color is white, cream or other light colors, you can choose any range of colors but do not get a deep dark.
For other colors, choose a darker shade than before.
For example, if the current faded carpet is red, dyeing with blue colored dye will result a purple color carpet.
If your carpet is yellow and you want to add red dye, you will get an orange carpet.
You also can choose the darker color carpet dye that matches with the interior design of the room.
In order to dye carpet properly, you will need carpet shampoo, carpet dye, spray bottle, stiff scrubbing brush, tape, plastic cover and a piece of scrap carpet.
Once you are prepared with all these equipment, follow the work instructions below.
Since carpet dyeing using strong dyes, you have to think about safety purposes.
Protect your hand rubber gloves and wear old clothes.
It is important to make sure the carpet is clean enough so that it can absorb the dye effectively.
Use carpet shampoo by following the instructions provided on the label.
Allow the carpet to dry out completely before you proceed to the next step.
Follow closely the instructions provided on the label.
Pour the dye solution in a spray bottle and shake very well to make sure the dye dissolve evenly in the water.
In order to test out the color, spray a little on a scrap piece of carpet and examine the result.
You can add more water or dye until you get your desired color.
Start with a small part of the carpet and then keep on further.
Do not spray too much dye in one part because it can mess up the carpet and padding.
Use a stiff scrubbing brush in circular motion to apply the dye into the carpet, so that the dye distribute evenly.
Once you complete the job, leave the carpet overnight to dry out completely.
Now you know how to die your carpet.
Enjoy your new look carpet!
Learn more about this author,.
Click here to send this author comments or questions.
how to dye carpet::Long story short i am in the market for a new carpet
how to dye carpet